Call +1 (888) 800-6897
Call +1 (888) 800-6897
Last updated: November 13, 2026. This is a sizing guide, not a substitute for a manufacturer’s installation manual or a local code check. We sell ZLINE range hoods; the width rules below are general practice plus links to in-stock models. We are not claiming authorized-dealer status for any brand.
Quick answer: choose a hood at least as wide as the cooktop. For an island, consider one size up so the hood can catch steam on all four sides. Then check CFM and the model’s install guide.
Match the hood to the cooking surface, not to the island countertop or the wall cabinets. If the range is 36 inches, start at 36 inches of hood width. A narrower hood leaves burners outside the capture area, which is how grease and steam escape into the room.
Standard widths are 30, 36, 42, 48 and sometimes 60 inches. If your cooktop sits between sizes, round up.
A wall hood sits against a wall, so most of the plume rises into a three-sided pocket. Same-width is often enough: a 30-inch wall hood over a 30-inch range, or a 36-inch wall hood over a 36-inch range. In-stock examples today include the ZLINE KB-30, KB-36, KB-48 and the higher-CFM ZLINE 667-36.
An island hood hangs in the open. Air can drift in every direction, so many installers size the island hood 3 to 6 inches wider than the cooktop, or simply step up one standard size (a 42- or 48-inch island hood over a 36-inch range) when the island and duct run allow it. In-stock ZLINE island examples today include the KE2iCRN-BT-30, GL2iCRN-BT-36 and KE2iCRN-BT-48.
For the CFM and ducting differences between the two mounts, see wall vs island range hood CFM.
| Cooktop width | Typical wall hood | Typical island hood (when space allows) |
|---|---|---|
| 30 inch | 30 inch | 30 or 36 inch |
| 36 inch | 36 inch | 36, 42 or 48 inch |
| 48 inch | 48 inch | 48 or 60 inch |
Treat this as a starting point. Overhang, ceiling height, island depth and the hood’s capture area all matter. If the island is too small for a wider hood, keep the same width and be more careful with CFM, mounting height and cooking style (high-BTU wok or grill cooking needs more capture).
A wide hood that is under-powered still leaves smoke in the room. After you pick a width, use the range hood CFM calculator. Hoods over 400 CFM often trigger makeup-air rules; see makeup air for hoods over 400 CFM. Mounting height and duct diameter belong in the model’s installation guide, not in a generic article.
Browse in-stock hoods in the range hoods collection.
As a starting rule, the hood should be at least as wide as the cooktop. A 36-inch range usually wants a 36-inch or wider hood. Always confirm the model's installation guide, because overhang and mounting type change the recommendation.
Often yes. A wall hood is backed by a wall, so rising heat and steam have one main escape path. An island hood is open on all sides, so many manufacturers and kitchen designers recommend going one standard size up (for example, a 42- or 48-inch island hood over a 36-inch cooktop) when the ceiling and island size allow it.
It can be, if the manufacturer’s install guide allows it and the hood has enough CFM and capture area for the cooktop. Same-width is more common on wall hoods than on islands. If you are unsure, size up or ask a local installer to check clearance and ducting.
No. Width is about capture area; CFM is about how much air the fan can move. After you pick a width, use our range hood CFM calculator and the cooktop’s BTU or watt rating to check airflow, and read the makeup-air note if the hood is over 400 CFM.
As of November 13, 2026 we have in-stock ZLINE wall hoods in 30, 36 and 48 inches (KB-30, KB-36, KB-48, 667-36) and in-stock ZLINE island hoods in 30, 36 and 48 inches (KE2iCRN-BT-30, GL2iCRN-BT-36, KE2iCRN-BT-48). Availability changes; check the product page before you buy.