Skip to content
Free shipping on select appliances. Need help building a package? Call 888-800-6897.
Free shipping on select appliances. Need help building a package? Call 888-800-6897.
PUQpress automatic espresso tamper

PUQpress Models Compared: Which Automatic Tamper Fits Your Grinder?

Last updated: November 14, 2026. This article is general guidance, not a substitute for the manufacturer's manual or local code. We are not claiming authorized-dealer status for any brand.

Quick answer: Choose an integrated PUQpress based on your grinder. Per PUQpress, the M5 is made for Mahlkönig E80 grinders, the M6 for the Victoria Arduino MY 75 (G) and MY 85 (G), and the M4 for the Fiorenzato F64 and F83. If your grinder isn't on that list, the PUQpress Mini is a stand-alone tamper that sits on the counter and doesn't attach to a grinder.

Integrated vs. stand-alone

PUQpress splits its automatic tampers into two families. The integrated models (the M series) are each built for specific grinders, so you grind and tamp in the same spot. Per PUQpress, they are "built to fit your grinder" and designed to maximise bench space. The stand-alone models, including the Mini, sit on the counter next to whatever grinder you use.

That makes the first question simple: is your grinder one that an integrated model is made for? If it is, the matching M model is usually the tidiest setup. If it isn't, look at a stand-alone unit.

The models side by side

Model Made for (per PUQpress) Tamping pressure Tamper range Profiles
PUQpress M5 Mahlkönig E80S and E80 GbW grinders 5–30 kg 53–58.3 mm 5
PUQpress M6 Victoria Arduino MY 75 (G) and MY 85 (G) 5–30 kg 53–58.3 mm 5
PUQpress M4 Fiorenzato F64 and F83 10–30 kg 53–58.3 mm 3
PUQpress Mini Stand-alone, used next to any grinder 10–30 kg 53–58.3 mm 3

Per PUQpress, pressure on these models adjusts in 1 kg steps. The tamper range shows the sizes PUQpress lists for each model. Each unit is configured for one size, so check the size on the listing you order.

PUQpress M5: for Mahlkönig E80

Per PUQpress, the M5 is an "integrated tamper made for E80s & 80 GBW grinders by Mahlkönig." It shares the widest pressure range in this group (5–30 kg) with the M6 and has five tamping profiles, which PUQpress names Speedy, Precision, Hulk, Soft, and Single. That range of profiles is useful if you want to fine-tune tamp behavior for different coffees or recipes. The version we carry is set up for 58.3 mm.

PUQpress M6: for Victoria Arduino MY 75 and MY 85

Per PUQpress, the M6 is the integrated tamper made for the Victoria Arduino MY 75 (G) and MY 85 (G). Like the M5, it has a 5–30 kg pressure range and five tamping profiles. If you run one of these grinders and want grinding and tamping in one footprint, this is the matching model. Our listing is the 58.3 mm version.

PUQpress M4: for Fiorenzato F64 and F83

Per PUQpress, the M4 is made for Fiorenzato F64 and F83 grinders. It tamps at 10–30 kg and has three profiles: Speedy, Precision, and Single. Our listing offers 58.3 mm and 57.3 mm options, and both sizes appear on PUQpress's tamper chart. Match the size to your portafilter basket.

PUQpress Mini: the stand-alone option

The Mini is PUQpress's compact stand-alone automatic tamper. It doesn't attach to a grinder, so it works next to whichever grinder you already have. Per PUQpress, it tamps at 10–30 kg with three profiles and is rated for up to 7 kg of coffee per week, which suits home bars and lower-volume service. The version we carry is 58.3 mm.

Choosing the right tamper size

The tamper diameter must match your espresso machine's basket, not your grinder. PUQpress publishes a tamper chart that lists sizes from 53.0 to 58.3 mm and matches them to espresso machine brands. Per PUQpress, switching across the 56 mm boundary requires a different upper clamp. Measure your basket or check your machine's documentation before you order.

What if your grinder isn't listed?

We haven't confirmed a dedicated integrated PUQpress model on PUQpress's site for every grinder we carry, including the Mahlkönig E65T GbS and the Ceado Rev. A stand-alone tamper like the Mini doesn't depend on the grinder at all. For any integrated fit, check PUQpress's current product pages or ask us before you order.

Shop in-stock

FAQ

Which PUQpress fits a Mahlkönig E80?

Per PUQpress, the M5 is the integrated tamper made for Mahlkönig E80S and E80 GbW grinders.

Which PUQpress fits Victoria Arduino MY 75 or MY 85 grinders?

Per PUQpress, the M6 is made for the Victoria Arduino MY 75 (G) and MY 85 (G).

Which PUQpress fits Fiorenzato F64 and F83 grinders?

Per PUQpress, the M4 is the integrated tamper made for Fiorenzato F64 and F83 grinders.

Does the PUQpress Mini attach to a grinder?

No. The Mini is a stand-alone automatic tamper that sits on the counter next to your grinder.

What tamper size do I need?

Match the tamper diameter to your espresso machine's basket. PUQpress's tamper chart lists sizes from 53.0 to 58.3 mm by machine brand.

— Culinary Cave

Previous article Commercial Espresso Grinder Buying Guide: Grind-by-Sync, Burr Size and Workflow
Next article Black Friday 2026 Kitchen Appliance Buying Checklist