Skip to content
Free shipping on select appliances. Need help building a package? Call 888-800-6897.
Free shipping on select appliances. Need help building a package? Call 888-800-6897.
THOR Kitchen 36-inch professional gas range in stainless steel

Black Friday 2026 Kitchen Appliance Buying Checklist

Last updated: November 14, 2026. This article is general guidance, not a substitute for the manufacturer's manual or local code. We are not claiming authorized-dealer status for any brand.

Quick answer: Before you order a major kitchen appliance this Black Friday, confirm five things: the unit fits your cutout and your delivery path, it matches your fuel type (natural gas or propane), your circuit matches the electrical spec, your hood is sized for the cooktop, and you know what your freight delivery includes and how to inspect it. Then register the warranty once it is installed.

1. Measure the cutout and the delivery path

Most returns and installation delays start with a tape measure. Pull the manufacturer's spec sheet for the exact model and check it against your space, not just the nominal size. A "36-inch" range is rarely exactly 36 inches wide at every point.

  • Cutout: width, depth, and height, including countertop overhang and any backsplash or trim.
  • Clearances: side, rear, and overhead clearances listed in the installation manual, especially to combustible surfaces.
  • Delivery path: every doorway, hallway, stair turn, and elevator between the truck and the kitchen. Remember that the crate is larger than the appliance.
  • Door swing: oven and refrigerator doors need room to open fully without hitting an island or wall.
  • Outdoor units: for grills and pizza ovens, check the pad or counter size, the clearance to walls and overhangs, and the route through gates.

2. Confirm fuel type and gas conversion

Gas appliances usually ship configured for natural gas or liquid propane, and some include a conversion kit while others require one separately. Check which configuration the model you are ordering uses and what conversion involves. Gas conversion and connection should be done by a licensed professional following the manufacturer's instructions and local code.

If you are choosing between all-gas and dual-fuel, our 36-inch gas vs. dual-fuel comparison walks through the trade-offs.

3. Check electrical requirements (amps and volts)

Dual-fuel and electric ranges, induction cooktops, and many wall ovens require a dedicated 240V circuit at a specific amperage. Even all-gas ranges often need a standard 120V outlet for igniters, lights, and convection fans. Compare the spec sheet to what is actually behind the cabinet, including the receptacle type, and talk to a licensed electrician before you order if the numbers don't match. Upgrading a circuit after delivery can hold up the whole project.

4. Size the ventilation (CFM, width, ducting)

A hood should generally be at least as wide as the cooking surface, and island hoods are often sized wider because there are no walls to help contain smoke. Required airflow (CFM) depends on the cooktop's BTU output, the hood style, the length and bends of the duct run, and local code, which may also require make-up air above certain CFM levels. Confirm the duct diameter, mounting height, and whether the hood will be ducted or recirculating.

See island hood width vs. cooktop width for sizing guidance, and browse range hoods.

5. Plan freight delivery and inspection

Large appliances typically ship by freight carrier, not parcel service. Ask your seller what your order includes (for example, curbside or liftgate service) and plan to be available to receive it. Inspect the crate and the unit before signing, note any damage on the delivery receipt, and take photos. Our freight delivery inspection checklist covers each step, and our shipping policy and refund policy explain how to report a problem.

6. Register the warranty

Most manufacturers ask you to register the product and keep proof of purchase. Write down the model and serial number, keep your invoice, and follow the manufacturer's registration instructions after installation. Warranty terms are set by the manufacturer, and many require professional installation to stay valid, so read them before you schedule the install.

7. Financing with Affirm

Affirm financing is available at checkout for eligible buyers, subject to approval. PayPal is also accepted. Review the terms shown at checkout before you complete your order.

8. Questions to ask before you order

  • Is this the exact model, configuration, and fuel type I need?
  • Does the spec sheet match my cutout, clearances, and delivery path?
  • What are the electrical, gas, and ventilation requirements, and does my home meet them?
  • What does the delivery service include, and how will I be contacted to schedule it?
  • What should I do if the crate or unit arrives damaged?
  • How do I register the warranty, and who handles warranty service in my area?
  • What does the refund policy say about returning large appliances?

For more planning help, see all of our kitchen buying guides.

Shop in-stock

FAQ

What should I measure before ordering a range?

Measure the cutout width, depth, and height, the clearances listed in the installation manual, and every doorway, hallway, and stair turn on the delivery path. Compare them to the manufacturer's spec sheet for the exact model.

Can a natural gas range be converted to propane?

Many gas ranges can be converted with a manufacturer-approved kit, but it varies by model. Check the spec sheet, and have a licensed professional perform the conversion according to the manual and local code.

How many CFM does my range hood need?

It depends on the cooktop's BTU output, hood style, duct run, and local code. The hood should generally be at least as wide as the cooking surface. Check the manufacturer's recommendations and local make-up air requirements.

Is financing available?

Affirm financing is available at checkout for eligible buyers, subject to approval. PayPal is also accepted.

What should I do if my appliance arrives damaged?

Note the damage on the delivery receipt before signing, take photos, keep the packaging, do not install the unit, and report it following our shipping and refund policies.

— Culinary Cave

Previous article PUQpress Models Compared: Which Automatic Tamper Fits Your Grinder?
Next article Appliance Freight Delivery: How to Inspect Before You Sign