Call +1 (888) 800-6897
Call +1 (888) 800-6897
Last updated: November 14, 2026. This article is general guidance, not a substitute for the manufacturer's manual or local code. We are not claiming authorized-dealer status for any brand.
Quick answer: Pick a commercial espresso grinder by workflow first, then burr size. If you want the grinder to correct its own grind based on shot data, look at Mahlkönig's Grind-by-Sync models: the E65T GbS doses by time and the E65W GbS doses by weight. If you want large 83 mm flat burrs with an optional weight module, look at the Ceado Rev Steel or Rev Titan. If you want a vertical-burr grinder that also handles filter coffee, look at the Bentwood Vertical 63.
Before you compare burr sizes, answer three questions about your bar:
Grind-by-Sync (GbS) is Mahlkönig's name for grinders that adjust their own grind size using shot data. Per Mahlkönig, a compatible espresso machine or scale records the time of the last shot and sends it to the grinder over Wi-Fi or a wired USB connection. The grinder compares that time with the target brew time in its recipe. If shots run fast, it grinds finer. If they run slow, it grinds coarser. Mahlkönig notes it may take up to five shots for the grinder to start adjusting, and it advises dialing in roughly before you turn sync on.
Sync only works with compatible machines or Mahlkönig's own scale, so check Mahlkönig's current compatibility list against your espresso machine first.
Both models are in Mahlkönig's E65 family. Per Mahlkönig, they use 65 mm special steel flat burrs. The main difference is how they dose:
If your team already weighs every shot, compare the E65W. For a simpler time-dosed setup, compare the E65T.
Ceado's Rev grinders use larger 83 mm flat burrs. The two models differ mainly in burr material and rated burr life:
Per Ceado, both have a hopper of about 1600 g, a digital dose setting with a grind reference on the display, and an interchangeable weight module that can be mounted in under two minutes. For cleaning, Ceado says the top of the grind chamber comes off with three screws and the grind setting doesn't need to be readjusted afterward. Ceado's Rev pages list a "PFA module," but we couldn't find a definition of PFA on Ceado's site. Check the listing or ask us if you need that detail.
Per Bentwood, the Vertical 63 uses 63 mm burrs mounted vertically, which Bentwood says reduces retention. Bentwood also lists stepless micrometric grind adjustment, two saved grind times plus a barista mode for manual start and stop, and the option to single-dose or use a full hopper. Bentwood presents it for filter, espresso, and other brew methods, so it suits shops that want one grinder for more than espresso.
The Bentwood Vertical 75 is a larger-burr sibling. We couldn't find a Vertical 75 page on Bentwood's own site, so we can't confirm its specs from the manufacturer. Check the product listing for current details.
Bigger burrs aren't automatically better. Geometry, motor, speed and retention matter too. Compare the manufacturer's listed output (g/s) and rated burr life, not diameter alone.
Pairing a grinder with an automatic tamper can make the workflow more consistent. Integrated tampers fit only specific grinders. See our PUQpress models comparison to check grinder fit before you order.
Per Mahlkönig, Grind-by-Sync grinders receive shot times from a compatible espresso machine or scale and adjust grind size toward the recipe's target brew time.
Per Mahlkönig, the E65T GbS doses by time and recalibrates grind time when grind size changes. The E65W GbS doses by weight. Both use 65 mm special steel burrs.
No. Sync needs a compatible espresso machine or Mahlkönig's scale. Check Mahlkönig's current compatibility list for your machine.
Per Ceado, the Rev Steel uses 83 mm steel flat burrs rated for 900 kg, and the Rev Titan uses 83 mm TiN-coated titanium flat burrs rated for 2.5 tons.
Some can. Per Bentwood, the Vertical 63 is designed for filter, espresso, and other brew methods.
— Culinary Cave