How to Pair a Range Hood with an ILVE Range

Last updated: October 26, 2026.

Short answer: Pair an ILVE range with a hood that is at least as wide as the cooktop, meets the higher of HVI width and BTU-based CFM estimates, and matches your duct path. Confirm clearances and make-up air with a licensed installer.

Sizing steps

1. Get total burner BTU/hr from the ILVE model sheet
2. Run both methods in the CFM calculator
3. Choose ducted exhaust when cooking with gas
4. Match finish/trim if the kitchen design requires a coordinated look

Browse ILVE hoods and ranges, plus wall mount hoods. Related: ventilation checklist.

FAQ

How much CFM for an ILVE range?

Add the burner BTUs from the ILVE spec sheet, divide by 100 for a common gas rule of thumb, and also run HVI's width method. Use the higher number, then check both manuals.

Do I need a matching ILVE hood?

Not required. Match width, CFM, duct size, and finish goals. A matching ILVE Majestic/Nostalgie hood is one option; other ducted hoods can work if specs align.

Does ILVE hood CFM over 400 need make-up air?

Hoods capable of more than 400 CFM often trigger IRC make-up air rules where adopted. Confirm with your installer.